Skip to main content

FlushError

Struct FlushError 

#[non_exhaustive]
pub struct FlushError { pub submitted: GrSemaphoresSubmitted, }
Expand description

A Ganesh flush failed.

This type is not part of Skia’s C++ API. The native GrDirectContext::FlushResult reports whether the flush succeeded and whether semaphores were submitted as two independent fields, which makes a failure easy to overlook: inspecting it reads like an ordinary status check, and nothing draws attention to the flush having failed. The Rust flush methods therefore map a failed flush to Err so that the failure has to be handled explicitly, and this type carries the one piece of information that still has to be acted on.

A flush fails in the following situations:

  • The context was abandoned, for example after a device loss or a call to crate::gpu::DirectContext::abandon().
  • The flush is reentrant: it was issued from an on-flush callback or a finished proc while another flush was still in progress.
  • The flushed crate::Image or crate::Surface is not backed by this context, is not GPU-backed (a CPU-backed surface has no effect), or is null.
  • An on-flush callback’s preFlush failed, in which case the render tasks were never executed.
  • Uploading pending data to the GPU failed, for example because a vertex, index or draw-indirect buffer could not be unmapped.
  • A GPU resource could not be allocated or instantiated, for example when the device ran out of memory.
  • A render task failed, for example because a stencil buffer could not be attached, a render pass could not be created, or a pixel transfer failed.
  • An intermediate submit issued while flushing failed.
  • For the flush_and_submit* methods, the submit that follows the flush failed.

Handling a failure is not optional:

  • The rendering results of a failed flush are undefined and must be discarded. Presenting them or reading them back yields undefined output.
  • The semaphores reported by Self::submitted may still have been submitted to the GPU, so the client must still keep them alive and wait on them (or perform an equivalent global synchronization) before deleting them. Ignoring them leads to a use-after-free or a hang.

Fields (Non-exhaustive)§

This struct is marked as non-exhaustive
Non-exhaustive structs could have additional fields added in future. Therefore, non-exhaustive structs cannot be constructed in external crates using the traditional Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.
§submitted: GrSemaphoresSubmitted

Whether any semaphores were submitted during the flush process.

Will be SemaphoresSubmitted::No if no semaphores were specified. If it is SemaphoresSubmitted::Yes, the semaphores were submitted even though the flush failed, so they must be waited on before they are deleted.

Trait Implementations§

§

impl Clone for FlushError

§

fn clone(&self) -> FlushError

Returns a duplicate of the value. Read more
1.0.0 (const: unstable) · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
§

impl Copy for FlushError

§

impl Debug for FlushError

§

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more
§

impl Display for FlushError

§

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more
§

impl Eq for FlushError

§

impl Error for FlushError

1.30.0 · Source§

fn source(&self) -> Option<&(dyn Error + 'static)>

Returns the lower-level source of this error, if any. Read more
1.0.0 · Source§

fn description(&self) -> &str

👎Deprecated since 1.42.0:

use the Display impl or to_string()

1.0.0 · Source§

fn cause(&self) -> Option<&dyn Error>

👎Deprecated since 1.33.0:

replaced by Error::source, which can support downcasting

Source§

fn provide<'a>(&'a self, request: &mut Request<'a>)

🔬This is a nightly-only experimental API. (error_generic_member_access)
Provides type-based access to context intended for error reports. Read more
§

impl PartialEq for FlushError

§

fn eq(&self, other: &FlushError) -> bool

Equality operator ==. Read more
1.0.0 (const: unstable) · Source§

fn ne(&self, other: &Rhs) -> bool

Inequality operator !=. Read more
§

impl StructuralPartialEq for FlushError

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
§

impl<T> AnyEq for T
where T: Any + PartialEq,

§

fn equals(&self, other: &(dyn Any + 'static)) -> bool

§

fn as_any(&self) -> &(dyn Any + 'static)

Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
§

impl<ST, DT> CastableFrom<ST, Initialized, Initialized> for DT
where ST: ?Sized, DT: ?Sized,

§

impl<ST, DT> CastableFrom<ST, Uninit, Uninit> for DT
where ST: ?Sized, DT: ?Sized,

Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dest. Read more
§

impl<T> Downcast for T
where T: Any,

§

fn into_any(self: Box<T>) -> Box<dyn Any>

Convert Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>. Box<dyn Any> can then be further downcast into Box<ConcreteType> where ConcreteType implements Trait.
§

fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>

Convert Rc<Trait> (where Trait: Downcast) to Rc<Any>. Rc<Any> can then be further downcast into Rc<ConcreteType> where ConcreteType implements Trait.
§

fn as_any(&self) -> &(dyn Any + 'static)

Convert &Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &Any’s vtable from &Trait’s.
§

fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)

Convert &mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &mut Any’s vtable from &mut Trait’s.
§

impl<T> DowncastSync for T
where T: Any + Send + Sync,

§

fn into_any_arc(self: Arc<T>) -> Arc<dyn Any + Send + Sync> ⓘ

Convert Arc<Trait> (where Trait: Downcast) to Arc<Any>. Arc<Any> can then be further downcast into Arc<ConcreteType> where ConcreteType implements Trait.
§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

§

fn equivalent(&self, key: &K) -> bool

Compare self to key and return true if they are equal.
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

§

impl<T> Instrument for T

§

fn instrument(self, span: Span) -> Instrumented<Self> ⓘ

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more
§

fn in_current_span(self) -> Instrumented<Self> ⓘ

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

§

impl<T> Read<Exclusive, BecauseExclusive> for T
where T: ?Sized,

§

impl<T, S> SimdFrom<T, S> for T
where S: Simd,

§

fn simd_from(_simd: S, value: T) -> T

§

impl<F, T, S> SimdInto<T, S> for F
where T: SimdFrom<F, S>, S: Simd,

§

fn simd_into(self, simd: S) -> T

Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
§

impl<T> ToSmolStr for T
where T: Display + ?Sized,

§

fn to_smolstr(&self) -> SmolStr

Source§

impl<T> ToString for T
where T: Display + ?Sized,

Source§

fn to_string(&self) -> String

Converts the given value to a String. Read more
Source§

impl<T> ToStringLocalized for T
where T: ToString,

Source§

fn to_string_local(&self, _cx: &impl DataContext) -> String

Method for converting the current type to a String via a translation using fluent.
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = !

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, !>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
§

impl<T> WithSubscriber for T

§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> ⓘ
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

fn with_current_subscriber(self) -> WithDispatch<Self> ⓘ

Attaches the current default Subscriber to this type, returning a [WithDispatch] wrapper. Read more